AudioPressBox APB-112 OW-D-USB Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken AudioPressBox APB-112 OW-D-USB herunter. AudioPressBox APB-112 OW-D-USB 12 Seiten. Press conference audio distribution amplifier

Seite drucken

Operations

Connect the APB to Dante network

with PoE capability

APB-112 OW-D-USB is a PoE Class 3

device, so it can be powered from a basic

PoE

Make the Dante signal routing

APB is set by default to obtain IP

address from DHCP server.

In Dante network you will see the APB as:

APB112OW-D-USB-serialnumber. You can

change it in Dante controller software. In this

software you can also route the signal to APB

For more information about Dante controller set up click on the following link:

https://www.audiopressbox.com/pages/audiopressbox-apb-112-ow-d-usb-manual

Set up the levels

Set up the output level on your source device

to reach the nominal output on APB – 0dB LED

on Output Level indicator. You can also set the

output level switch for each output as desired

– Mic or Line

APB is ready to use!