Abus Nexello PLMK10100 Betriebshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Sicherheitssensoren Abus Nexello PLMK10100 herunter. Abus Nexello PLMK10100 19 Seiten. Bypass opening detector
Seite drucken
2. Functional overview
2.1. Inclusion / Teach-in device
This product supports SmartStart:
SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR code
present on the product with a controller that provides SmartStart integration. No further action is
required, and the SmartStart product will be automatically added within 10 minutes of powering up near
the network.
Slide the opening detector holder down.
If
your
Z-wave
controller
SmartStart, follow these instructions for Product
Classic Inclusion:
Activate the inclusion mode (teach-in mode) on the
gateway. (for more details, refer to the operating
instructions of the gateway)
Or, in your Z-Wave app, press the "+" button (Add /
Inclusion) and follow the instructions to set the
gateway to inclusion mode.
Keep the device within range of the gateway.
Remove
the
safety
compartment. We recommend using only the original
Duracell battery supplied.
Then press the Link button 3 times quickly (within 1.5
seconds) using the pin to start the inclusion on the
device.
The LED starts flashing green for up to 60 seconds
8
English
does
not
support
strip
from
the
battery