Aplex TB-587 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für E/A-Systeme Aplex TB-587 herunter. Aplex TB-587 10 Seiten. Machine vision lighting & i/o control board

Seite drucken

6. External Trigger/Lighting Source Output Control Interface (LIGHTING_OUT, External):

(Pitch2.5mm 1x2 Pin Connector, PN#H510M02 Terminal), +DC14~24V Output, maximum power

supply up to 60 Watt for total; single channel power supply up to 30 Watt. DC level adjustable

mode should be concerned with high-level shaking situation.

* Power input for lighting using shall be higher than 80 Watts, and the output voltage shall be

between +DC24V~36V. *

Terminal

CH0

CH1

CH2

CH3

7. General I/O (CON1,DB37）:

Standard DB37 Female connector inserts, 4 x Trigger In (4x dedicated input channels, 24V

differential signal, with isolated.)

TI1+,TI1-, TI2+,TI2-,TI3+,TI3- ,TI4+,TI4-

---Combined to DB-37connector

4x Trigger Out (4x dedicated output channels, 24V differential signal, with isolated.)

TO1+, TO1-, TO2+, TO2-, TO3+, TO3-, TO4+, TO4-

---Combined to DB-37connector

16x High-speed General I/O, can switch to NPN or PNP through hardware, default NPN setting,

24V level Optocoupler isolation design.

GND_24V_GPIO, DO1, DO2, DO3, DO4, DO5, DO6, DO7, DO8

24V_GND_GPIO, DI1, DI2, DI3, DI4, DI5, DI6, DI7, DI8

---Combine to DB-37connector

Pin#

Signal

24V_OUT1

GND_OUT1

24V_OUT1

GND_OUT1

24V_OUT1

GND_OUT1

24V_OUT1

GND_OUT1

- 8 -

External Connection

CH0+

CH0-

CH1+

CH1-

CH2+

CH2-

CH3+

CH3-