APPA 33II Gebrauchsanweisung - Seite 13

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Multimeter APPA 33II herunter. APPA 33II 16 Seiten. Clamp multimeter

3-3 AC Voltage Measurement

1. Set the function switch at " V ~ " position.

2. Connect the black test lead to the "COM" terminal and the red test lead to the " V-Ω" terminal.

You can now place the test probes on the conductors to make the measurement.

3-4 Resistance Measurement

1. Set the function switch at " Ω " position.

2. Connect the black test lead to the "COM" terminal and red test lead to the " V– Ω " terminal.

3. Verify that the power to the circuit under test is off. Connect test leads to the circuit to make the measurement.

4. Built in buzzer sounds if the resistance of the circuit under test is less than approximately 50Ω.