ADE 2311 Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Skalen ADE 2311 herunter. ADE 2311 12 Seiten. Electronic table scales, portion scale

Power supply of the scale

The power supply of the scale is done with the integrated rechargeable battery or the IEC

Power Connector. Before connecting the mains cable with the scale make sure that the type of

current is corresponding with the type of current mentioned on the type label.

The battery pack is already installed in the base of the scale.

Charge the power-pack by using the mains adapter and connect the jack firmly.

Complete first charging of power-pack needs 24 hours.

The full battery life is approx. 100 hours.

If power-pack needs recharging there will be an arrow above the low battery symbol on

the display. Still the scale will operate for about 10 hours after which it will automatically

switch off to protect the battery.

You can also identify status of battery charging by the colour of the LED control light

placed in the right hand corner above the display. When the scale is plugged into mains

the power pack will be recharged automatically. LED is illuminated green the batteries

have full charge. If it is red the battery is nearly discharged and yellow indicates the

battery is under charge.

Battery life becomes weaker if lifetime after charging becomes shorter. In this case

contact your local dealer or service partner.

Please make sure the local voltage supply corresponds to the indication printed on the

adapter.

Take the scale out of the packaging and place the scale on a plane and stable surface. The

surrounding has to be clean and dry. The scale should not be placed near to open windows or

doors, air conditioning systems or fan heaters, because draught could influence the measuring

results.

Place the plastic tray platform on the scale by placing the four pins in the appropriate holes.

Then place the stainless steel weighing platform on the platform.

Make sure all four feet of the platform have direct contact to the surface.

The spirit level of the scale is an additional tool to make sure the scale is carefully positioned

and offers best results when the air bubble is centered.

The alignment of the scale must be checked and

corrected every time the location of the scale is

changed!

90612-30-180320-Rev009-UM-en