Austdac HUBBUS HBLTU Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Touch-Terminals Austdac HUBBUS HBLTU herunter. Austdac HUBBUS HBLTU 12 Seiten. Termination unit
Seite drucken2 Warnings and Precautions
2.1 WARNINGS
WARNING:
The HubBus Signal –ve line must not be tied to any common, 0V, ground or
Earth points.
WARNING:
Do not use the same power supply as the channel generator. Any other
modules or equipment must be galvanically isolated from the HubBus channel
generators power source.
WARNING:
If the HBLTU is used in a manner not specified by Austdac then the protection
provided by the HBLTU may be impaired.
WARNING:
This product may contain chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
2.2 SYMBOLS
Markings that may be used across the HubBus range of products to indicate precautions
that must be taken to maintain safe operation of the system.
2.3 PRECAUTIONS
•
Only qualified personnel shall install and service the HBLTU.
•
Mains supply fluctuations are not to exceed ±10% of the nominal supply voltage.
2.3.1 USER ACCESS
There are no user serviceable parts within the HBLTU. The user should not open or
disassemble the HBLTU.
HubBus Line Termination Unit
HBLTU USER MANUAL
Direct Current (DC) Supply
Earth (ground) Terminal
Caution, possibility of electric shock
Caution (refer to user manual)
6 OF 12
125-258-12
Issue: 01