ADE PWI30 Betriebshandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Skalen ADE PWI30 herunter. ADE PWI30 16 Seiten. Electronic bench scales portion scale with induction charging
Once all the desired parameter settings have been selected, press and hold down the
button for four seconds to exit the mode.
The settings will be accepted and the scale will turn off.
Before cleaning, disconnect the device from the power supply. Do not use any aggressive
cleaning agents while cleaning, but only a damp cloth or conventional disinfectants.
The weighing bowl and the silicone mat can easily be removed for cleaning. Open the
quick-release fastener of the load cross and remove both of them from the scale housing. All
parts can now be cleaned separately. The housing that is designed completely without
inaccessible grooves, gaps or acute angles can be wiped off from all sides with a cloth as
described above. After cleaning, assemble all parts in reverse order.
In addition to the four adjustable feet that can be unscrewed for cleaning, there are two
membranes on the underside that prevent the formation of condensate inside the scale. To
ensure protection against mechanical damage, the membranes are provided with two bleed
screw caps that must also be cleaned if they are soiled. During assembly, make sure that the
membranes and seals are inserted correctly!
Bleed screw cap
Membrane
Membrane film
Safe operation is no longer guaranteed:
•
If the AC adapter or the power cord shows visible damages.
•
If the AC adapter no longer functions properly.
•
After prolonged storage in humid areas.
Notify your service partner in these cases for your own safety.
No other power supply and battery other than those provided by the manufacturer may
be used. Otherwise, there is a risk of interference with other electrical devices!
The connection cable must be laid such that there is no danger of stumbling.
Keep all parts of the packaging in case you need to return the shipment to avoid possible
damage during transportation.
Disconnect all connected cables before shipping. You can thus avoid unnecessary damage.
PWI30-190920-Rev005-UM-en
Cleaning
Safety information
Storage and transport conditions
Seal
Flat seal
10