4Sight 4SK010 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Dash Cameras 4Sight 4SK010 herunter. 4Sight 4SK010 7 Seiten.

Accessories

Micro USB cable

Micro USB car charger

Mount

Memory card

Memory card reader

Functional operation

Installation

Easy to install onto any windshield, and the 12V charger will fit any vehicles 12V outlet.

Charging:

A. Powered by a rechargeable lithium-ion battery

Two methods of charging the Dash Cam. One way is through the supplied

charger, and the second method is by using the supplied microUSB cable using

your computer.

B. connect 12V car charger

When powering on your vehicle, the unit will automatically power on. When you

power down your vehicle, the Dash Cam will take up to 5 seconds to power off

and automatically save the previously recorded file.

Note: You must only use 5V output voltage. It is recommended that you always

use the original charger, as it was designed to work with your Dash Cam. Some

vehicles have constant 12V power flowing from the 12V outlet. In this case, you

must long press the power button on your Dash Cam to shut it down.

Video mode

When the Dash Cam is powered on, it enters Video mode. If the unit has a TF memory

card inserted, it will automatically start recording. When the unit is recording, the green

indicator light will blink. If the green indicator light is solid, the unit is not recording and is

in standby mode.

Emergency lock

While the unit is recording, you can press the MODE/SOS (5) button to lock the

currently recording file. Locking a file will make it un eligible to be recorded over during

the looping procedure.