ADE Optima G3 Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Sicherheitssystem ADE Optima G3 herunter. ADE Optima G3 17 Seiten. Intruder alarm system

Seite drucken
ADE Optima G3 Betriebsanleitung

How to change your second code

Your alarm system can have a second user code. You may find it useful to set-up this second code
for use by a neighbour for use when you are on holiday. The second user code operates like your
user code, but it cannot be used to change or delete your code.
1.
Prog
Press
and enter your code
0
1
2
will light and the Day indicator will go out to
indicate that you are in Programming mode.
2.
7
Press
to select second code reprogram. The
Attack and Zone indicators 1 to 4 will be lit to
prompt you to enter a new 4 digit user code.
3.
Key in the new second code
4.
If the code is accepted the system will produce a
series of rapid beeps.
If the code is rejected, for example if it is already
in use, the system will produce a flat reject tone.
You must go back to step 2.
5.
Reset
Press
to exit program mode. The TA
(Tamper) indicator will go out and the Day
indicator will light.
Example
If your second code is 1234 and you wish to change the code to 7890, then:
Prog
1
Press

How to delete your second code

You can delete the second code to prevent it from being used.
1. Follow steps 1 and 2 of How to change your second code and press
2. Follow steps 5 of How to change your second code.
3
. The TA (Tamper) indicator
n
n
2
3
4
7
Accenta/Optima G3 intruder system
1 2 3 4 5 6 7 8
ZONES
Panel
1
2
3
Remote Keypad
1 2 3 4 5 6 7 8
ZONES
Panel
1
2
3
Remote Keypad
n
n
.
Rising beeps
1 2 3 4 5 6 7 8
ZONES
Panel
1
2
3
Remote Keypad
7
8
9
Power
Attack
Tamper
Day
ZONE
4
5
6
7
8
TA
PA
Day
Power
Power
Attack
Tamper
Day
ZONE
4
5
6
7
8
TA
PA
Day
Power
Power
Attack
Tamper
Day
ZONE
4
5
6
7
8
TA
PA
Day
Power
Reset
0
.
Omit
.
11