Dymo DYMO S150 Digital Shipping Scale and 4XL Label Printer Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Skalen Dymo DYMO S150 Digital Shipping Scale and 4XL Label Printer herunter. Dymo DYMO S150 Digital Shipping Scale and 4XL Label Printer 8 Seiten. Digital shipping scale

Seite drucken

Technical Specifications

Model
Capacity
Resolution
Units
Auto Shut Off
Operating Temperature
Power
For information about our other scale products, visit www.dymo.com.

Troubleshooting

Problem/Error Message
No display
is displayed
Negative number is displayed
is displayed
0.0
Display reads
with an item on the
platform
S150 is displayed
If you need further assistance, contact Technical Support at (877) 724-8324. You can also
obtain support at www.dymo.com.
4
S150
150 pounds (68 kg)
0.2 lb. (0.1 kg)
lb. (kg)
After two minutes of inactivity
40° - 104° F (4.5° - 40° C)
110 V AC adapter or 9-volt
alkaline battery
Solution
Ensure the scale is plugged in, or replace the battery.
Replace the 9-volt battery.
A tare value is displayed as a negative number when the items
are removed from the scale. Press ZERO/HOLD to reset the
scale to zero.
The item on the scale platform exceeds the maximum capacity
of the scale. Remove the item immediately to prevent damage
to the scale.
This can happen because:
• The ZERO/HOLD button was pressed while an item was on
the scale.
• Power to the scale was disconnected or turned off and then
on again with an item on the scale.
In both of these cases, remove the item from the platform and
press the ZERO/HOLD button to return the display to 0.0.
With the scale off, do one of the following:
• Make sure nothing is on the scale platform, make sure the
scale is on a flat surface, and then turn the scale on.
• Rotate the power adapter in the power outlet, plug the
power adapter into a different outlet, or switch to battery
power and then turn the scale on.
• Unplug the coiled cable from the scale display, plug the cable
back into the scale display, making sure the connector clicks
into place, and then turn the scale on.