65 AMPS Stone Pony Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrumenten-Verstärker 65 AMPS Stone Pony herunter. 65 AMPS Stone Pony 4 Seiten.

WELCOME TO THE

65 AMPS Stone Pony

Experience!

We have gone to great effort to create the ultimate responsive and expressive guitar amp. The 65-

Stone Pony is completely hand-wired with the highest quality and select choice of transformers,

components and speakers.

GENERAL DESCRIPTION OF THE 65-Stone Pony AND ITS CONTROLS:

The 65-Stone Pony utilizes the EF86 tube on the input then feeds into a 12AX7/ECC83 driven tone

stage with BASS and TREBLE tone controls. There is a MASTER VOLTAGE that can be switched on

or off, giving the choice of a complete "non-master" type circuit or more output and gain control when

engaged, from full stage volume to practice levels.

The BUMP controls serve as a mid-range / gain boost, offering a completely different pallet of tones. It

can also function as a foot-switchable lead boost.

The BUMP function operates both with the MASTER VOLTAGE on or off. The Stone Pony offers

crystalline clear jangle (BUMP OFF) to screaming fat midrange (BUMP ON) to high-gain preamp

distortion scooped crunch with the MASTER VOLTAGE engaged (and BUMP OFF).

FRONT PANEL:

HI & LO INPUT – For powerful clean tones, try the LO input and turn up VOLUME to "5 to 8" with the

BUMP OFF. Great chime with single coil pickups.

VOLUME – Main input volume. With MASTER VOLTAGE disengaged, this control sets the amps

overall volume and gain, non-master style.

TREBLE & BASS – The tone stage. Higher levels of BASS and TREBLE and lower VOLUME will

give serious jangle tones. As you increase the VOLUME, you can decrease the BASS and TREBLE

levels to bring in more midrange and overdrive. These controls decrease in effect when the BUMP

circuit is engaged.

BUMP ON/OFF SWITCH – Engages and disengages the BUMP circuit. This function is foot-

switchable with the footswitch jack on the rear panel.

BUMP TONE – Allows additional tone shaping of the BUMP circuit and increases or decreases the

level of treble.

BUMP LEVEL – A 6-way rotary switch that allows for different levels of BUMP tone. Set at "1" , BUMP

function adds mid-range and gain. As the BUMP increases from "2 - 6", the BUMP level is increased.

As you increase the level up to "6" there is a significant level of midrange gain boost.

MASTER VOLTAGE – This control can serve in different ways. If you wish to use it to decrease your

volume to a comfortable level, dial up your sound first, then engage the MASTER VOLTAGE with the

ON / OFF switch and set to desired level. You may need to adjust the tone controls slightly, increasing

TREBLE to compensate for the MASTER VOLTAGE and significantly lower output levels. If using the

MASTER VOLTAGE for high-gain preamp distortion, engage MASTER VOLTAGE and set to lower

levels (around "2 - 3" to start. Turn up input VOLUME to a higher setting ("8 - 10"). Adjust tone

controls. For more fat midrange introduce the BUMP control.

MASTER ON / MASTER OFF – Engages or disengages the MASTER VOLTAGE circuit. In the OFF

position, the MASTER VOLTAGE is entirely out of the circuit and the amp is purely "non-master".