GREAT PLANES Spirit 100 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug GREAT PLANES Spirit 100 herunter. GREAT PLANES Spirit 100 20 Seiten.

❏

6. Attach the servos to the blocks using the hardware that

comes with your radio system. HINT: Drill a 1/16" [1.6mm]

pilot hole for the servo screws and strengthen the holes with

a drop of thin CA.

❏

7. Attach the servo lead to the extension. Fit the servo

hatch to the wing. Use the holes in the cover as a guide and

drill four 1/16" [1.6mm] holes through the plywood servo

hatch mounts.

❏

8. Temporarily mount the servo hatch cover to the wing

with four #2 x 3/8" [9.5mm] screws. Remove the screws and

hatch. Then, harden the holes in the wing with thin CA. Allow

the glue to dry and remount the servo hatch cover.

❏ ❏

9. Align the aileron control horn with the servo arm.

Glue the control horn to the aileron with a small drop of CA.

❏ ❏

10. Drill two 1/16" [1.6mm] holes through the aileron.

Secure the control horns with two 2-56 x 1/2" [13mm]

screws and the nylon control horn back.

❏ ❏

11. Screw a nylon clevis 15 turns onto each of the four

12" [305mm] pushrods. Slide a silicone retainer on each of

the nylon clevis.