ADEMCO 998EX Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Sicherheitssensoren ADEMCO 998EX herunter. ADEMCO 998EX 2 Seiten. Passive infrared motion detectors

Seite drucken

Table 1. INSTALLATION GUIDE FOR LENSES

STANDARD LENS

PROTECTION RANGE

Mtg.

Height 4.6m

2.6m

Ð20¡

Ð16¡

Ð11¡

2.4m

Ð20¡

Ð15¡

Ð10¡

2.1m

Ð16¡

Ð12¡

Ð8¡

1.8m

Ð13¡

Ð10¡

Ð6¡

ÐÐÐÐÐÐÐ- Vertical Pattern Setting ÐÐÐÐÐÐ

99LR LONG RANGE LENS

PROTECTION RANGE

Mtg.

Height

12m

18m

2.6m

Ð10¡

Ð4¡

Ð1¡

2.4m

Ð9¡

Ð3¡

Ð1¡

2.1m

Ð6¡

Ð1¡

0¡

1.8m

Ð3¡

0¡

+1¡

ÐÐÐÐÐÐÐÐ- Vertical Pattern Setting ÐÐÐÐÐÐÐ

*Important: When using the Long Range lens, set the PIR

for intermediate response (Pulse Count DIP switch in UP

position)

TEST PROCEDURES

Important: Two-minute warm-up time is required after

applying power. Testing should be conducted with the pro-

tected area cleared of all people. Disarm the protective

systemÕs control during the test procedure to prevent

reporting of unwanted alarms.

Remove front cover and set DIP switch #2 (Pulse

Count) to the setting which will be used for this detec-

tor in the installation. The LED must be enabled at this

time (DIP switch #1 down).

Replace front cover and walk through protective

zones, observing that the detectorÕs LED lights when-

ever motion is detected (the LED serves as a Walk-

Test indicator during this procedure).

For the 998EX detector, check the downward-looking

zone by walking along the wall directly beneath the

detector.

The absolute range of all PIR units is subject to variation

because of different types of clothing, backgrounds and

ambient temperature. For this reason, ensure that the

most likely intruder routes are well within the PIRÕs pro-

tective zones and that walk-testing is carried out along

these routes.

After the ÒWalk-TestÓ is complete, the LED may be dis-

abled (DIP switch #1 UP).

MAINTAINING PROPER OPERATION

In order to maintain the detector in proper working condition,

it is important that the user observe the following.

Power should be provided at all times. Loss of power

to the unit will result in the alarm contacts reverting to

an alarm state.

Units should never be re-aimed or relocated without

the advice or assistance of the alarm service company.

The physical surroundings of the protected area

should not be changed. If furniture or stock is moved,

or air-conditioning or additional heating is installed, the

system may have to be readjusted by the alarm ser-

vice company.

Walk-tests should be conducted frequently (at least

weekly) to confirm continued proper coveage by each

detector.

TROUBLESHOOTING

INTERMITTENT ALARM (LED OPERATIVE)

Rapid temperature change. Check for electric or gas

heaters, open flames, electric arcs, etc.

Remedy: Locate source and reposition detector.

Drafts causing drapes, light fixtures, display material to

move.

Remedy: Eliminate source of motion.

INTERMITTENT OR CONTINUOUS ALARM

DC voltage supplied to detector is inadequate, intermit-

tent, or polarity reversed.

Remedy: Ensure that proper polarity and adequate

voltage is supplied and that wiring is intact (no

opens/shorts) and connections secure.

Protective loop is interrupted (open).

Remedy: Determine whether interruption is in protec-

tive loop wiring or at detectorÕs alarm relay contacts.

Disconnect protective loop at detector relay contact

terminals. Check continuity across terminals. If absent

(and proper voltage is supplied to the detector), return

unit for replacement. If present, check protective loop

wiring.

LED INOPERATIVE

LED DIP switch #1 in UP position.

Remedy: Set DIP switch #1 in DOWN position.

LED malfunction. Check for broken/shorted leads.

Remedy: Return unit for replacement.

12m

15.2m

DETECTION AREA CHANGES

Repositioned furniture or equipment in the protected

Ð8¡

Ð7¡

area.

Remedy: Caution customer about layout changes.

Ð8¡

Ð6¡

Reposition detector.

Mounting surface is unstable. A few degrees of vertical

Ð6¡

Ð5¡

shift can change range substantially.

Remedy: Mount on secure surface.

Ð5¡

Ð4¡

PANEL INDICATES CONTINUOUS FAULT IN ZONE OF

PROTECTION CONTAINING PIRs (PIR's alarm LED not lit)

Too many detectors being used in the zone. Each detector

adds 15 ohms of series resistance and the zoneÕs allow-

able loop resistance is being exceeded.

Remedy: Reduce the number of detectors used in the zone

until the series resistance is within the allowable

loop resistance permitted by the control.

24m

30.4m

0¡

Regular maintenance and inspection (at least annually)

by the installer and frequent testing by the user are vital

0¡

+1¡

to continuous satisfactory operation of any alarm sys-

tem.

+1¡

The installer should assume the responsibility of devel-

oping and offering a regular maintenance program to

+2¡

the user, as well as acquainting the user with the proper

operation and limitations of the alarm system and its

component parts. Recommendations must be included

for a specific program of frequent testing to insure the

systemÕs operation at all times.

THE LIMITATIONS OF YOUR PASSIVE INFRARED

While the Intrusion Detector is a highly reliable intrusion

detection device, it does not offer guaranteed protection

against burglary. Any Intrusion Detection device is sub-

ject to compromise or failure to warn for a variety of rea-

sons:

¥ Passive Infrared Motion Detectors can only detect

intrusion within the designed ranges as diagrammed in

this installation manual.

¥ Passive Infrared Motion Detectors do not provide volu-

metric area protection. They do create multiple beams

of protection, and intrusion can only be detected in

unobstructed areas covered by those beams.

¥ Passive Infrared Detectors cannot detect motion or

intrusion that takes place behind walls, ceilings, floors,

closed doors, glass partitions, glass doors, or win-

dows.

¥ Mechanical tampering, masking, painting or spraying

of any material on the lenses, windows or any part of

the optical system can reduce the detection ability of

the Passive Infrared Motion Detector.

¥ Passive Infrared Detectors sense changes in tempera-

ture; however, as the ambient temperature of the pro-

tected area approaches the temperature range of 32¡

to 40¡C, the detection performance can decrease.

¥ This Passive Infrared Detector will not operate without

appropriate DC power connected to it, or if the DC

power is improperly connected (i.e., reversed polarity

connections).

¥ Passive Infrared Detectors, like other electrical

devices, are subject to component failure. Even

though this equipment is designed to last as long as

10 years, the electronic components in it could fail at

any time.

We have cited some of the most common reasons that a

Passive Infrared Motion Detector can fail to catch intru-

sion. However, this does not imply that these are the only

reasons, and therefore it is recommended that weekly

testing of this type of unit, in conjunction with weekly test-

ing of the entire alarm system, be performed to ensure

that the detectors are working properly.

Installing an alarm system may make the owner eligible

for a lower insurance rate, but an alarm system is not a

substitute for insurance. Homeowners, property owners

and renters should continue to act prudently in protecting

themselves and continue to insure their lives and property.

We continue to develop new and improved protection

devices. Users of alarm systems owe it to themselves

and their loved ones to learn about these developments.

ALARM DEVICE MANUFACTURING CO.

165 Eileen Way, Syosset, NY 11791

TO THE INSTALLER

MOTION DETECTOR

A DIVISION OF PITTWAY CORP.

ADEMCO SIX-YEAR LIMITED WARRANTY

Alarm Device Manufacturing Company, a Division

of Pittway Corporation, and its divisions, sub-

sidiaries and affiliates ("Seller"), 165 Eileen Way,

Syosset, New York 11791, warrants this detector

to be in conformance with its own plans and speci-

fications and to be free from defects in materials

and workmanship under normal use and service

for 72 months from the date stamp control on the

product. Seller's obligation shall be limited to

replacing, at its option, free of charge for materials

or labor, a detector which is proved not in compli-

ance with Seller's specifications or proves defec-

tive in materials or workmanship under normal use

and service. Seller shall have no obligation under

this Limited Warranty or otherwise if the detector is

altered or improperly repaired or serviced by any-

one other than Ademco factory service. In case of

defect, return the detector to or an authorized dis-

tributor for an immediate replacement.

THERE ARE NO WARRANTIES, EXPRESS OR

IMPLIED, OF MERCHANTABILITY, OR FITNESS

FOR A PARTICULAR PURPOSE OR OTHER-

WISE,

WHICH

EXTEND

DESCRIPTION ON THE FACE HEREOF. IN NO

CASE SHALL SELLER BE LIABLE TO ANYONE

FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY

OTHER WARRANTY, EXPRESS OR IMPLIED,

OR UPON ANY OTHER BASIS OF LIABILITY

WHATSOEVER, EVEN IF THE LOSS OR DAM-

AGE IS CAUSED BY THE SELLER'S OWN NEG-

LIGENCE OR FAULT.

Seller does not represent that its detector may not

be compromised or circumvented; that the detector

will prevent any personal injury or property loss by

burglary, robbery, fire or otherwise; or that the

detector will in all cases provide adequate warning

or protection. Buyer understands that a properly

installed and maintained alarm may only reduce

the risk of a burglary, robbery, fire or other events

occurring without providing an alarm, but it is not

insurance or a guarantee that such will not occur

or that there will be no personal injury or property

loss as a result. CONSEQUENTLY, SELLER

SHALL HAVE NO LIABILITY FOR ANY PERSON-

AL INJURY, PROPERTY DAMAGE OR OTHER

LOSS BASED ON A CLAIM THE DETECTOR

FAILED TO GIVE WARNING. HOWEVER, IF

SELLER IS HELD LIABLE, WHETHER DIRECTLY

OR INDIRECTLY, FOR ANY LOSS OR DAMAGE

ARISING UNDER THIS LIMITED WARRANTY OR

OTHERWISE, REGARDLESS OF CAUSE OR

ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL

NOT IN ANY CASE EXCEED THE PURCHASE

PRICE OF THE DETECTOR, WHICH SHALL BE

THE COMPLETE AND EXCLUSIVE REMEDY

AGAINST SELLER. This warranty replaces any

previous warranties and is the only warranty made

by Seller on this detector. No increase or alter-

ation, written or verbal, of the obligations of this

Limited Warranty is authorized.

BEYOND

THE