Automationdirect.com Productivity 2000 P2-08TAS Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Kontrolleinheit Automationdirect.com Productivity 2000 P2-08TAS herunter. Automationdirect.com Productivity 2000 P2-08TAS 4 Seiten. Ac isolated output
Seite drucken
WARNING:
To minimize the risk of potential safety problems, you
should follow all applicable local and national codes that regulate
the installation and operation of your equipment. These codes vary
from area to area and it is your responsibility to determine which
codes should be followed, and to verify that the equipment, instal-
lation, and operation are in compliance with the latest revision of
these codes.
Equipment damage or serious injury to personnel can result
from the failure to follow all applicable codes and standards. We
do not guarantee the products described in this publication are
suitable for your particular application, nor do we assume any
responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or opera-
tion of this equipment, or if you need additional information, please
call Technical Support at 770-844-4200.
This publication is based on information that was available at
the time it was printed. At AutomationDirect.com® we constantly
strive to improve our products and services, so we reserve the right
to make changes to the products and/or publications at any time
without notice and without any obligation. This publication may also
discuss features that may not be available in certain revisions of
the product.
Removable Terminal Block Specifications
Part Number
P2-RTB
Number of Positions 18 Screw Terminals
30–16 AWG (0.051–1.31 sq. mm)
Solid / Stranded Conductor
Wire Range
3/64 in (1.2 mm) Insulation Max.
1/4 in (6–7 mm) Strip Length
Conductors
"USE COPPER CONDUCTORS, 75°C" or Equivalent.
Screw Driver Width
Screw Size
Screw Torque
2.5 lb∙in (0.28 N∙m)
*Recommended Screwdriver TW-SD-MSL-1
4
www.productivity2000 .com
P2-RTB-1
18 Spring Clamp Terminals
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
19/64 in (7–8 mm) Strip Length
0.1 inch (2.5 mm) Maximum*
M2
N/A
N/A
General Specifications
Operating Air Temperature
Storage Temperature
Humidity
Environmental Air
Vibration
Shock
Field to Logic Side Isolation
Insulation Resistance
Heat Dissipation
Enclosure Type
Module Keying to Backplane
Module Location
Field Wiring
EU Directive
Connector Type (sold separately)
Weight
Agency Approvals
*Meets EMC and Safety requirements. See the D.O.C. for details.
Document Name
P2-08TAS-DS
Copyright 2016, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Tech Support 770-844-4200
0° to 60°C (32° to 140°F),
-20° to 70°C (-4° to 158°F)
5 to 95% (non-condensing)
No corrosive gases permitted
IEC60068-2-6 (Test Fc)
IEC60068-2-27 (Test Ea)
1800VAC applied for 1 second
>10MΩ @ 500VDC
1500mW
Open Equipment
Electronic
Any I/O slot in a Productivity2000 System.
Use ZIPLink Wiring System or removable terminal
block (not included). See "Wiring Options" on page 3.
See the "EU Directive" topic in the Productivity Suite
Help File. Information can also be obtained at:
www.productivity2000.com
18 position removable terminal block
85g (2.9 oz)
UL 61010-1 and UL 61010-2-201 File E139594,
Canada and USA
CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-2-
201 Safety)*
Edition/Revision
Date
2nd Ed.
9/4/2019