ADEN POWERKIT GO Gebrauchsanweisung und Montageanleitung - Seite 13

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung und Montageanleitung für Zubehör für Fahrräder ADEN POWERKIT GO herunter. ADEN POWERKIT GO 16 Seiten.

Seite drucken

POWERPACK — ASSEMBLY INSTRUCTIONS

ADEN GmbH

BATTERY USE

Commissioning

To activate the support via the thumb lever or the twist grip, the crank

must be moved (pedal sensor).

The motor starts up by lightly operating the thumb lever or the twist grip.

The "further the turn", the stronger the support.

Attention:

When pedalling and giving "full throttle" at the same time,

the front wheel could rise unintentionally.

Using the Charger

The charger is plugged into a socket connected and then the

yellow plug with the Battery connected.

The red LED on the charger lights up - charging is in progress

If the battery is completely discharged, it takes about 2 hours

until the battery is fully charged again.

The green LED on the charger lights up

- Charging completed / battery charged

The battery can now be unplugged.

For longer storage, it is recommended

to have the battery charged to approx. 50%.

www.aden-sports.com

EN | P. 13