iHealth PT2L Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Thermometer iHealth PT2L herunter. iHealth PT2L 15 Seiten. Infrared digital no-touch thermometer
Seite drucken
Release the button when"℃" appears,the unit set as ℃ ;
2)
Release the button when"℉" appears,the unit set as ℉.
3)
6.
Indication of temperature status
When the measured temperature T<37.5℃(99.5 ℉), " " appears on the LCD.
1)
When the measured temperature 37.5℃≤T﹤38.0℃(99.5 ℉≤T＜100.4℉), " "
2)
appears on the LCD.
3)
When the measured temperature T≥38.0℃(100.4℉), " " appears on the LCD.
7.
Low power reminder function
When switched ON for use, the thermometer will automatically detect remaining battery
capacity. If battery capacity is low but adequate for measurements, the low power symbol
[
] will be displayed with the measurement results. However, If the battery capacity is
too low for measurements, the screen will display a single, flashing [
automatically switch OFF after 8 seconds. To continue using the device, old batteries
must be replaced.
8. Replacing batteries
1) Press down and hold the battery cover with the finger and apply some force to slide
the cover backwards to open the battery compartment.
2) Remove the old batteries and install the new batteries.
3) Refer to the battery polarity symbols to orient the batteries properly during installation.
Make sure that the new batteries are tightly inserted into the battery compartment and
make sure that the polarity is not reversed during installation.
4) Return the battery cover to close the battery compartment.
⚫
Comply with relevant national laws and regulations when disposing of the used
batteries.
⚫
Do not dispose of batteries directly into the trash bag.
⚫
Remove the batteries if the device will not be used more than one month.
⚫
When using, shall not touch battery and the patient simultaneously.
⚫
Do not throw batteries into fire.
7
] icon and