Autonomic MMS 2 Setup-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Server Autonomic MMS 2 herunter. Autonomic MMS 2 17 Seiten. Mirage media server

Rack Mounting

The MMS·5A comes configured for a shelf mount installation. For rack mount installs, remove

the four feet from the bottom of the chassis and install the two supplied rack mount ears to the

front sides of the MMS·5A.

The MMS·2 is designed for shelf-mount installations. However, should you wish to rack mount

the unit, Middle Atlantic manufactures a rack mount shelf and faceplate customized to fit the

MMS·2.

Using the supplied audio cables, connect 1-4 of the analog audio outputs to source inputs on

your amplifier or receiver. You may also connect the digital audio output and/or the USB audio

cable to a compatible amplifier. The digital output on the MMS·5A supports 24-bit/192kHz

digital audio, and the MMS·2 supports 24-bit/96 kHz audio.

NOTE

The MMS·2 utilizes jack detection technology to sense which audio outputs are connected. You

will not be able to control or access any analog audio channel that does not have the adapter

plugged in.

You can use the MMS On-screen Display to browse content, view photo slideshows and see

now-playing information about your audio program, you may connect the DVI or HDMI video

outputs to a compatible display device.

NOTE

Some HDMI receivers and switches can have compatibility issues with the MMS. If you receive

an error message on screen, or if the MMS seems non-responsive, try plugging the HDMI cable

directly into the display, bypassing any adaptors, switches, or AV receivers.

If you are using an IP based control system, the Mirage Media Server can be controlled over IP

port 5004, and no further connections are necessary.

More information and control system modules for Crestron, AMX, RTI, Control4 and URC

systems are available at

5 of 16

www.autonomic-controls.com/support_downloads.php

Mirage Media Server Set Up