Autool CT400 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte Autool CT400 herunter. Autool CT400 14 Seiten. Injector cleaner & tester

● Press the item selection up and down keys to select the "10 High-speed fuel

injecting amount test" item.

● The rest of the operation steps are consistent with item 08.

Notes：

1)Uniformity. This is for checking the uniformity carried out at various rpm.

When the test liquid level is at 2/3 of the test tube, please pause or stop the

machine to observe the uniformity of the injecting amount. Injecting difference of

all injectors on one vehicle should be kept within 2%. Or refer to the relevant

technical manual of the fuel injector to determine the uniformity of the injecting

amount.

2)Observe the shape of the injectors. Observe whether the injecting shapes and

angles of all fuel injectors on the same vehicle are identical at various speeds.

At the same time, you can adjust the injection pulse width of the fuel injectors to

compare whether the minimum injection pulse width among the fuel injectors is

consistent.

3) Leakage test. Leakage test is to inspect the sealing conditions of the injector

needle valve under system pressure. (Observe the tightness of the fuel injectors,

generally, there should be no leakage within one minute)

11 Reverse Flush Test:

● Press the item selection up and down keys to select "11 Reverse Flush",

and install the injectors in the opposite direction for cleaning.

12 Fully Automatic Cleaning items:

● Cleaning time can be set to a maximum of 20 minutes. Please connect to

various special parts that can clean the combustion chamber or throttle.

Maintenance

1. Tidy up

● Turn off the power and unplug the power plug.

● Put all the connectors back into the accessory box for storage.

● Put the ultrasonic cleaner back into the original bottle and seal it, and wipe

the equipment clean with a dry soft cloth.

● If it is not used for a long time, open the test liquid valve and drain the test

liquid back into the original bottle for sealed preservation.

2. Maintenance

Replacement of test liquid

● Impurities can be built up in the test liquid after being used for a period of

time. Do not use contaminated test liquid, otherwise, injector and fuel pumps