Coram Showers 1200 Door X Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Inneneinrichtung Coram Showers 1200 Door X herunter. Coram Showers 1200 Door X 8 Seiten. Sliding door

Seite drucken
a
7
From
inside
32mm
a: Place door in position on the tray, fix wall channels to walls using 32mm screws and screw caps.
b: Check door is centrally positioned, perfectly vertical and square in the frame.
Drill inside of wall channels using 3mm drill bit in the two lower positions shown. Fix using 10mm screws and screw caps.
c: Check door is centrally positioned, perfectly vertical and square in the frame.
Drill the next four holes in the positions shown inside of the wall channels using 3mm drill bit. Fix using 10mm screws and screw caps.
8
12mm
PN40095
Inside
Select the vertical seal with the 12mm flipper (PN40095) and trim
to 1717mm. Fit trimmed seal to the fixed panel, the seal must sit tight
against glass clamps (top and bottom).
Important: Seal 'flipper' must be on inside of the enclosure.
Note: Wetting the glass with water will help fit the seal.
Inside
9mm
Trim to
1717mm
Inside
b
ø 3
mm
10mm
c
Inside
ø 3
mm
9
Fit the door handles to the door ensuring the
plastic washers are fitted each side of the glass.
10mm
PN60511
Door
5