Mainpine IQ Express RF6124 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Aufnahmegeräte Mainpine IQ Express RF6124 herunter. Mainpine IQ Express RF6124 2 Seiten.
Seite drucken
fax. simplified.
Using this guide
This guide applies to the
Mainpine IQ Express™ 1-Port SP/LP
following Mainpine products:
Mainpine IQ Express™ 2-Port SP/LP
Mainpine IQ Express™ 4-Port SP/LP
Mainpine IQ Express™ 8-Port SP/LP
Package contents
This guide should be used in conjunction with documentation
found on the Mainpine website, http://www.mainpine.com.
1 x Quickstart Guide
1 x Low Profile Bracket
Before you begin
and either:
• Read this guide thoroughly. Refer to the Regulatory Notice
IQ Express™ 1-Port SP
document that contains important safety warnings and national
1 x RJ11-RJ11 cable, or
or international requirements for proper installation of this
product. This document can be found on the Mainpine website,
IQ Express™ 2-Port SP
http://www.mainpine.com/REGNOT.PDF
2 x RJ11-RJ11 cables, or
• Familiarize yourself with instructions in the user manual, and
IQ Express™ 4-Port SP
installation procedures from your PC documentation.
2 x RJ14-RJ11 'Y' cables, or
IQ Express™ 8-Port SP
• Prepare your work area, and make sure you have the
2 x RJ61-RJ11 'Y' cables
appropriate tools, referring to your PC documentation prior to
removing the board from its packaging.
Physical description
CAUTION
The IQ Express boards are
Static sensitive device!
multiport
analog
interface
Computer components
boards for use inside PC
are sensitive to
equipment in Fax applications.
electrostatic discharges.
The board will fit into any free
Make sure you follow
PCI Express x1, x4, x8, or x16
appropriate precautions
slot, and is fully compatible
when handling this
board.
with the short, long, low-
profile, and standard-profile
form factors
P/N: RF6118
P/N: RF6120
P/N: RF6122
P/N: RF6124
!
Risk of electric shock
Always make sure
equipment is powered
down and disconnected
before attempting
installation of this
product or otherwise
opening covers.
Hardware installation
A. Mounting bracket
B. Mounting bracket
screw point
C. Base board
D. Connector for cable
to telephone sockets.
Ports 1,3,5,7
E. Connector for cable
to telephone sockets.
Ports 2,4,6,8
F. PCI Express connector
IQ Express™ fitted with
Standard Profile Bracket
1.
Refer to your system documentation for information on removing covers and installing boards
throughout the procedure.
2.
Make sure the system is switched off and all cables are safely disconnected. Make a note of
where cables are connected for reconnection later.
3.
Remove the system cover.
4.
Select any available PCI Express slot, remove the slot cover, and keep the screw for step 8.
5.
Carefully remove the IQ Express™ board from the packaging, ensuring antistatic procedures
are observed. Hold the board only by the edges or mounting bracket, being careful to avoid
touching the PCI Express connector.
6.
Keeping the board aligned with the PCI Express slot, gently and firmly insert the PCI Express
connector on the board into the PCI Express expansion slot in your system.
7.
Ensure that the mounting bracket is flush with the chassis and that the PCI Express connector
is fully inserted and level.
8.
Fasten the mounting bracket to the chassis.
9.
Replace the system cover and reconnect all cables.
10. Connect the provided cables between the connectors on the board and the telephone sockets.
If longer cables are required it is recommended that RJ11 couplers be used in conjunction with
RJ11 extension cables to each telephone socket.
Connector pinout