Adexa HRQ-711 Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Backofen Adexa HRQ-711 herunter. Adexa HRQ-711 13 Seiten. Gas solid top with gas oven

Instruction Manual

※Do not use corrosive substances (e. g. potassium chloride) to clean

the ground under the equipment.

※To clean the dirt on the burner and baffle in the furnace regularly

(recommended once a week)

※ Do not change the ventilation space required for burning the

equipment.

※After daily work, the furnace body surface and the power cord can be

scrubbed with a wet towel without corrosive cleaner. It is strictly

prohibited to wash directly with water to prevent water infiltration,

damage the electrical performance, and cause electricity safety

accidents.

※If not used at any time, close the temperature controller and power

switch with the quick cut-off air source valve.

※When not used for a long time, the stove should be cleaned and placed

in a well-ventilated and no corrosive gas warehouse.

※Clean the stainless steel surface regularly and properly to prevent

surface oxidation and chemical damage to the machine.

※Clean before use, cut off the power supply, scrub with a wet towel

without corrosive detergent, and do not directly sprinkle water on the

product.

4. direction for use:

4.1 Upper iron plate furnace

※Turn the knob counterclockwise to the "★" position, press the knob

to the bottom, and constantly press the electronic lighter to ignite the

low fire burner (fire). Press the knob down for 20 seconds; observe the

fire burner (flame). When releasing the knob, the fire burner (flame) is

ignited; if not, repeat until it is ignited. If the stove is not used for

a long time or used for the first time, it may be a little longer firing

time (about two to three minutes), which is a normal phenomenon.

※When the small fire burner (flame) is lit, then rotate the knob