AFPV SN-AAT Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS AFPV SN-AAT herunter. AFPV SN-AAT 6 Seiten. Auto antenna tracker
Auch für AFPV SN-AAT: Handbuch (6 seiten)
Seite drucken
1. INSTALLATION
Input voltage: 7-16v.
If used compass, keep away from interference sources.
Close the compass, AAT support two installation directions, make sure you know which one you are
using.
WORK WITH SN_L FC
Make sure your OSD back-level is 125.
①
If OSD can not work normally please connect the video conditioner.
②
Check your firmware version is support aat; The latest firmware v6.0 can open the aat function
③
directly in the OSD setting menu.
2. KEY OPERATION
UP
DOWN
ENTER
BACK
3. MAIN OSD
The main OSD has three display menus, including distance, speed, latitude and longitude, packet loss
rate and other information.
4. OSD MENU OPERATION
Parameter menu: includes two pages, switch by UP and DOWN
ITEM
PORT
SERVO
COMPASS
DIR
CAL
VOL
YWA/PITCH1/2
BIAS1/2
CONNECT CAMERA CONDITIONER
Switch menu; Select menu; Hold for 3 seconds to release, switch offline/tracking mode.
Switch menu; Select menu.
Enter menu; Hold for 3 seconds to release, compass calibration.
Back to previous.
Port output mode
Offline/Tracking
AAT installation direction
check servo install error
Accurately adjust the angle range of servo
Adjust the servo bias
DESCRIPTION
ON/OFF
Voltage bias
CAMER
SN-AAT