IKEA BEJUBLAD Handbuch - Seite 22

Blättern Sie online oder laden Sie pdf Handbuch für Kochfeld IKEA BEJUBLAD herunter. IKEA BEJUBLAD 32 Seiten. Ikea oven
Auch für IKEA BEJUBLAD: Benutzerhandbuch (28 seiten), Handbuch (24 seiten), Handbuch (48 seiten), Handbuch (16 seiten), Gebrauchsanweisung (36 seiten), Handbuch (8 seiten), Handbuch (41 seiten), Handbuch (20 seiten), Gebrauchsanweisung (24 seiten)

Seite drucken
IKEA BEJUBLAD Handbuch
ENGLISH

Troubleshooting

Error
Description
code
ER03
10 sec.
ER21
Corresponding
E2
cooking area is turned
Corresponding
E3
cooking area is turned
Cooking area cannot
E6
be turned on.
Cooking areas are
E8
Corresponding
EH
cooking area is turned
E4
E5
E7
E9
Disconnect the hob from the power supply.
ER20
Wait a few seconds then reconnect the hob to the power supply.
ER22
If the problem persists, call the service centre and specify the error code that appears on the
ER31
display.
ER36
ER42
ER47
EA
Possible causes of the
error
Continuous key activation
detected.
Water or cookware placed on
Control panel.
The internal temperature of
electronic parts is too high.
Empty or wrong cookware.
Pot or glass temperature is too
high.
Electronic temperature too
high.
Wrong cookware.
Cookware is losing its magnetic
characteristics and may lead to
induction hob damage.
Power supply voltage and/or
frequency is out of range.
Fan failure.
Fan blocked by dust or fabrics.
Temperature sensor stuck for
cooking area.
Not enough temperature
change detected after
switching on the hob.
Solution
Remove water or cookware from glass
and Control panel.
Let the hob cool down.
ventillation.
If error persists, please contact After
Sales Service.
Let the hob cool down.
Use appropriate cookware.
Do not heat-up empty pots.
Use appropriate cookware.
The error is automatically cancelled
after 8s and the cooking area can be
used again.
In case of further upcoming errors
cookware have to be changed.
If error persists, please contact After
Sales Service.
Check mains voltage and/or frequency.
If needed contact After Sales Service.
Clean and remove foreign bodies from
fan.
If error persists, please contact After
Sales Service.
again after cooling down.
If error persists, please contact After
Sales Service.
22