HIKVISION DS-9500 Series NVR Kurzbedienungsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Kurzbedienungsanleitung für DVR HIKVISION DS-9500 Series NVR herunter. HIKVISION DS-9500 Series NVR 19 Seiten. Hikvision ds-9500 series nvr
Seite druckenDS-9500 Series NVR Quick Operation Guide
HDD
Ready
Backup
Backup Button
2
USB Ports
3
Power Button
4
Channel Status
5
Indicators
Rear Panel
DS-9508NI-S/R Rear Panel:
No.
Item
1
RESET
2
RS-232
3
LAN
4
eSATA
5
RS-485 Matching
Resistor Switch (SW)
RS-485
6
ALARM IN
ALARM OUT
7
GND
8
POWER
HDD indicator blinks red when data is being read from or written to HDD.
Ready indicator turns blue when NVR is functioning properly.
Backup indicator blinks blue when data is being backup.
Backup video files.
Universal Serial Bus (USB) ports for additional devices such as USB mouse
and USB Hard Disk Drive (HDD).
Powers NVR on/off.
Blue indicates recording, red indicates network connection, purple indicates
recording & network connection.
Description
Press and hold it for 10 seconds to reset all parameters to factory defaults.
Connect to RS-232 devices.
10/100/1000Mbps Self-adaptive UTP Ethernet interface.
Backup/extended storage interface, connect to external SATA disk,
CD-RW, disk array, etc.
The eSATA interface is provided for DS-9500NI-R by default and
optional for DS-9500NI-S.
Connection of 120-ohm terminator for RS-485 bus. ON=connected;
OFF=disconnected.
Connect to RS-485 devices, e.g., P/T receiver, etc. Use the T+ and T－
terminals of RS-485 interface to connect to the R+ and R- terminals of the
receiver.
16 relay alarm inputs
4 relay alarm outputs
Grounding
220VAC power supply
3