Align-Pilates M8-Pro Reformer Montageanleitung & Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Montageanleitung & Benutzerhandbuch für Ellipsentrainer Align-Pilates M8-Pro Reformer herunter. Align-Pilates M8-Pro Reformer 12 Seiten.
2. Unpacking the second outer box:
a. Carefully take off the lid of the carriage bed box and remove the bubble wrap - do not use a knife as you may
cut the vinyl - (you will notice there is a second box, please remove and put aside for use later in assembly) see
Fig.12.
b. We recommend 2 people remove the carriage bed from the box. It is best to familiarise yourself with the
underneath of the carriage at this point, so you are familiar with the functionality, including the side wheel
adjustment, spring attachment system and carriage anti-tipping device (Fig.13).
c. You will need to insert the carriage bed (2 people required) at an angle so the anti-tipping system does not hit
the runner (please bear this in mind when removing the carriage in future - you can only lift up one side) . You will
also need to ensure the bed is correctly orientated with the springs towards the padded foot bar prior to insert-
ing (Fig.14).
d. It's now time to open the smaller box from the second carton, which contains the maple rope risers, the
shoulder rests, pulleys, ropes, handles and bolts for the foot bar(Fig.15).
2x maple
rope risers
4
2x silent
double loop
straps
Fig.12
Fig.14
2x shoulder
rests
Fig.13
2x silent
rope pulleys
2x silent
ropes
Fig.15