Alirac HE115-125/950 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schleifer Alirac HE115-125/950 herunter. Alirac HE115-125/950 10 Seiten.
Seite druckenor against your body is unstable and may
lead to loss of control.
16.Do not force tool. Use the correct
tool for your application. The correct tool
will do the job better and more safely at the
rate for which it is designed.
17.Do not use tool if switch does not
turn on or off. Any tool that cannot be
controlled with the switch is dangerous and
must be repaired.
18.Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing the tool.
Such preventing safety measures reduce the
risk of starting the tool accidentally.
19.Store idle tools out of reach of
children and other untrained persons. Tools
are dangerous in the hands of untrained
users.
20.Maintain tools with care. Keep
cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are
less likely to bind and are easier to control.
21.Check for misalignment or binding
of moving parts, breakage of parts, and
any other conditions that may affect the
tools operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
22.Use
only
recommended by the manufacturer for your
model. Accessories that may be suitable for
one tool, may become hazardous when used
on other tools.
SERVICE
23.Tool service must be performed
only by qualified repair personnel. Service
or maintenance performed by unqualified
personnel can result in a risk of injury.
24.When serving a tool, use only
accessories
that
are
identical
replacement
instructions in the Maintenance section of
the manual. Use of unauthorized parts of
failure to follow Maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with
product (gained from repeated use) replace
strict adherence to grinder safety rules. If
you use this tool unsafely or incorrectly, you
can suffer serious personal injury.
1.Always
use
grinding wheel. A guard protects operator
from broken wheel fragments.
2.Accessories must be rated for at least
the speed recommended on the tool warning
label. Wheels and other accessories running
over rated speed can fly apart and cause
injury.
3.Hold tool by insulated gripping
surface when performing and operating
where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live"
make exposed metal parts of the tool "live"
and shock the operator.
4.When using depressed center grinding
wheels, be sure to use only fiberglass
reinforced wheels.
5.Always use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
6.Check the wheel carefully for cracks or
damaged before operation. Replace cracked
or damaged wheel immediately. Run the tool
(with guard) a no load for about a minute,
holding tool away from others. If wheel is
flawed, it will likely separate during this test.
7.Use only flanges specified for this tool.
8.Be careful not to damage the spindle,
-2-
www.makute.com
parts.
Follow
proper
guard
with