Brother 885-X13 Betriebshandbuch - Seite 44

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Symptom

▲

The needle is bent or blunt.

The needle is incorrectly installed.

The area around the hole in the needle

plate or the presser foot is scratched.

The upper

thread

breaks.

The bobbin case is scratched, or has a burr

on it.

You have not used a bobbin that has been

designed for this machine.

You have not wound the bobbin thread

properly.

The bobbin is scratched or does not turn

smoothly.

The lower

thread is

The thread is tangled.

tangled or

breaks.

You have not used a bobbin that has been

designed for this machine.

Bobbin is set incorrectly.

You have not threaded the upper thread

properly.

You have not wound the bobbin thread

properly.

You have not threaded the right

combination of thread and needle for the

The thread

fabric you are using.

tension is

incorrect.

You have not attached the presser foot

holder properly.

The thread tension is incorrect.

You have not used a bobbin that has been

designed for this machine.

Bobbin is set incorrectly.

You have not threaded the upper thread

properly or fitted the bobbin properly.

You have not fitted the spool properly.

You have not used the right

combination of fabric, thread and

needle.

The needle is bent or blunt.

The fabric is

wrinkled.

If thin fabrics are being sewn, the fabric is

not being fed correctly.

If thin fabrics are being sewn, the stitch is

too coarse.

The presser foot you are using is not

appropriate for the type of stitch that you

▼

want to sew.

43

Possible cause

How to put it right

Replace the needle.

Correctly install the needle.

Replace the needle plate.

Contact your retailer or the nearest

authorized service center.

Replace the bobbin case.

Contact your retailer or the nearest

authorized service center.

Use a bobbin that has been designed for

this machine.

Wind the bobbin thread properly.

Replace the bobbin.

Remove the tangled thread and clean

the race.

Use a bobbin that has been designed for

this machine.

Reset the bobbin thread correctly.

Correct the upper threading.

Wind the bobbin thread properly.

Choose a thread and needle that are

appropriate for the type of fabric.

Attach the presser foot holder properly.

Adjust the tension of the upper thread.

Use a bobbin that has been designed

for this machine.

Reset the bobbin thread correctly.

Thread the upper thread and wind the

bobbin thread properly.

Fit the spool properly.

Choose a thread and needle that are

appropriate for the type of fabric.

Replace the needle.

Sew with stabilizer material under the

fabric.

Shorten the stitch length.

Attach the presser foot that is correct

for the type of stitch that you want to

sew.

Page

7

7

–

–

12

12

–

40

12

14-15

16

12

21

–

26

12

14-15

12-19

16, 24

21

7

24

11

36