Brother MFC-J491DW Referenzhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Alles in einem Drucker Brother MFC-J491DW herunter. Brother MFC-J491DW 26 Seiten. Brief explanations for routine operations
Auch für Brother MFC-J491DW: Referenzhandbuch (34 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Referenzhandbuch (32 seiten), Handbuch (19 seiten), Handbuch (22 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Produktsicherheit (21 seiten)

Seite drucken
Brother MFC-J491DW Referenzhandbuch
5
Scan

Before Scanning

Before attempting to scan, confirm the
following:
• Make sure you have installed the Brother
software and drivers.
• Make sure the USB cable is connected
correctly, or that you are connected to the
network using your wireless access point/
router.
Scan from Your
Computer
There are several ways you can use your
computer to scan photos and documents on
your Brother machine. Use the software
applications provided by Brother, or use your
favorite scanning application.
For more detailed information, see the Online
User's Guide: Scan from Your Computer
®
(Windows
) or Scan from Your Computer
(Mac).
Scan Using the Scan
Button on the Machine
1
Load your document.
2
Press
(SCAN).
3
Press a or b to select the [to PC]
option, and then press OK.
4
Press a or b to select the [to File]
option, and then press OK.
5
If the machine is connected over the
network, press a or b to select the
computer where you want to send data,
and then press OK.
If the LCD prompts you to enter a PIN,
use the control panel to enter the four-
digit PIN for the computer, and then press
OK.
6
Do one of the following:
• To change the settings, go to the next
step.
• To use the default settings, press
Black Start or Color Start.
[Scan Type] depends on the default
settings. Pressing Black Start or Color
Start does not allow you to change the
settings.
7
Press a or b to select the [Scan
Settings] setting, and then press OK.
To use the [Scan Settings] option, a
computer with either ControlCenter4
®
(Windows
) or Brother iPrint&Scan (Mac)
software installed must be connected to
the machine.
8
Press a or b to select the [Set at
Device] setting, and then press OK.
9
Change the scan settings you want to
change, such as scan type, resolution,
file type and document size, if needed.
When finished press OK.
10
Press Black Start or Color Start.
10