Brother MFC-P2000 Handbuch zur Schnelleinrichtung - Seite 17
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Alles in einem Drucker Brother MFC-P2000 herunter. Brother MFC-P2000 43 Seiten. Laser printer / scanner / copier
Seite drucken
Using the Machine Status Monitor Program
Type C:\RPCX>STMX and press the Enter key to make the Machine Status Monitor
Program stay resident in your computer memory. If there are any changes to the machine
status, it displays a message on your computer screen.
If the machine status monitor program stays resident in your computer, you can monitor the
machine status on your computer screen immediately using the hot-key sequence
( Ctrl + Alt + R ).
To remove the Machine Status Monitor program from your computer memory, type
C:\RPCX>STMX/R and press the Enter key.
The RPC works in the environment where your machine is directly connected to your
computer. If you are using any printer buffer switches which do not support bi-directional
communication between the machine and computer, the program works only in the PC to
machine direction and cannot receive machine status information.
The program does not work with printers on a network.
If the RPC conflicts with some application software, exit your application software and
then run the RPC.
The RPC may work in the DOS-compatible box screen mode of Windows, however, it is
recommended that you completely exit from Windows to the DOS prompt before using the
RPC.
The Machine Status Monitor and some other Terminate-and-Stay programs cannot coexist
in the computer's memory. If they do not work properly together, use them one at a time.
You can suspend the Machine Status monitor with any of the following methods or
commands.
Type C:\RPCX>STMX/R and press the Enter key.
Hold the space bar down while executing the AUTOEXEC.BAT file at DOS startup to
prevent the status monitor being loaded as a TSR program.
- 15 -