Brother DCP-130C Benutzerhandbuch - Seite 33

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker Brother DCP-130C herunter. Brother DCP-130C 47 Seiten. Windows vista
Auch für Brother DCP-130C: Spezifikationsblatt (2 seiten), Handbuch zur Schnelleinrichtung (22 seiten), Handbuch zur Schnelleinrichtung (22 seiten), Setup-Handbuch (23 seiten), Handbuch zur Schnelleinrichtung (24 seiten), Handbuch zur Schnelleinrichtung (15 seiten)

Seite drucken

Error Message

Cause

The machine is out of paper or

No Paper Fed

paper is not properly loaded in the

paper tray.

The paper is jammed in the

machine.

The machine's memory is full.

Out of Memory

Paper is jammed in the machine.

Paper Jam

The machine has a mechanical

Print Unable

problem.

—OR—

A foreign objects such as a clip or

ripped paper is in the machine.

The machine has a mechanical

Scan Unable

problem.

—OR—

A foreign objects such as a clip or

ripped paper is in the machine.

A non-PictBridge compatible or

Wrong USB

broken device has been connected

device

to the PictBridge port.

Troubleshooting and Routine Maintenance

Action

Do one of the following:

Refill the paper in the paper tray, and then

press Mono Start or Colour Start.

Remove the paper and load it again and then

press Mono Start or Colour Start.

See Printer jam or paper jam on page 30.

Copy operation in progress

Press Stop/Exit and wait until the other

operations in progress finish and then try again.

Printing operation in progress

Reduce print resolution. (For details, see

Printing for Windows

in the Software User's

Guide on the CD-ROM.)

See Printer jam or paper jam on page 30.

Open the scanner cover and remove any foreign

objects inside the machine. If the error message

continues, disconnect the machine from the

power source for several minutes then

reconnect it.

Open the scanner cover and remove any foreign

objects inside the machine. If the error message

continues, disconnect the machine from the

power source for several minutes then

reconnect it.

Unplug the device from the PictBridge port, then

press On/Off to turn the machine off and then on

again.