A-Link RRAP Handbuch zur Schnellinstallation - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drahtloser Router A-Link RRAP herunter. A-Link RRAP 4 Seiten. Gigabit wlan router

Seite drucken

Content:

Step 1. Getting started.

(General information for product setup)

Step 2. Connect wireless by WPS button

(If your wireless device have WPS function)

Step 3. Connect your PC to the wireless network.

(Instructions how to connect your PC to the wireless network)

1. Getting started

(General information for product setup)

RRAP router have below settings as factory defaults:

WAN settings = DHCP client

Operation mode = Gateway

IP-address = 192.168.1.1

DHCP server = Enabled

2.4GHz WLAN SSID = 11N_xxxxxx

5GHz WLAN SSID = 11AC_xxxxxx

(xxxxxx=last six from WLAN MAC address)

Encryption = Enabled (WPA2 Mixed)

WLAN password = Check the "WLAN key" from product sticker

Management User name = admin ; Password = admin

RRAP is in "Gateway" mode as factory defaults. WAN port will get the IP

address from operator and all LAN ports as well as WLAN are behind in NAT

firewall at own local network. Your device will get IP address automatically

from router. On Step 2 you can find instructions to configure your wireless

device easily to router wireless network by WPS button.

Wireless network

If you want to use wireless network, you can connect to the 2.4GHz or 5GHz

pre-encrypted wireless network with WPS button (Step 2.) or with WLAN key

which can be found from router sticker. The wireless network name (SSID) for

2.4GHZ and 5GHz are different on every router and you can found names

from product sticker.

You can connect your PC either by Network cable or by wireless network. On

Step 3 is general instructions how to connect Windows10 to the encrypted

wireless network.

INFORMATION OF WIRELESS NETWORK SPEED!

Standard

Theoretical speed

802.11b

11Mb

802.11g

54Mb

802.11n (20MHz) 150Mb

802.11n (40MHz) 300Mb

802.11ac (80MHz) 867Mb

** The real speed will be determined always from distance and barriers

between router and PC. For example, walls, electricity, etc... The speed shown

in this guide is only illustrative purposes only.

Reset to factory defaults:

You can reset to factory defaults by press the Reset button about 7

seconds on back panel of the device when power on.

Real speed**

about 5Mb

about 20Mb

about 50Mb

about 200Mb

about 600Mb

2. Connect wireless by WPS button

(If your wireless device have WPS button, follow these steps)

Press RRAP router WPS button about 5 seconds when "Lock"

LED on router start flash

Within 2 minutes you need to press WPS button* on your wireless

device.

Wireless connection will be established automatically and it's

ready to use.

* follow your wireless device instructions to set WPS

3. Connect your PC to the wireless network

(Instructions how to connect your PC to the wireless network)

Windows10

1. Open wireless network icon from right side of task bar.

2. Choose 11N_xxxxxx* or 11AC_xxxxxx* and press Connect.

* Network name (SSID) can be found from product sticker. See the step 1.

3. Type password* and press Connect.

* Password (WLAN key) can be found from product sticker. See the step 1.

Technical support : 0600-41020 (2.70€ / min + local network fee)

Internet :

https://www.alinetrade.com

[email protected]

16b24T RRAP_EN_FI