AEG AWF8024M3SB Benutzerhandbuch - Seite 20

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine AEG AWF8024M3SB herunter. AEG AWF8024M3SB 40 Seiten.

Seite drucken

www.aeg.com

NOTE

At the end of the program, the time

remaining can suddenly decrease from

7 minutes or less to 0 due to the

overestimated total program time during

the load sensing phase. In some cases

(with perfectly balanced load) the

program time can be shorter than the

time estimated after the load sensing

phase is completed. This is a normal

behavior of the machine and not a cause

for concern as it does not compromise its

performance.

5.10 When The Washing

Program Is Completed, But

There Is Water In The Drum

(Option "Rinse Hold

The drum turns regularly to prevent

the creases in the laundry.

The indicator "Start/Pause" flashes to

remind you to drain the water.

The door lock indicator "

The door stays locked.

You must drain the water to

open the door.

To drain the water:

Press the "Start/Pause

The appliance drains the water and

spins with the maximum spin speed

for selected program.

Alternatively, before pressing the

"Start/Pause" touchpad, you can press

the "Spin " touchpad to change the

spin speed. You can select "No Spin

(

)", if you want the machine to only

drain the water.

When the program is completed and

the door lock indicator "

you can open the door.

Turn the program selector knob to the

position "Off" to turn off the appliance.

After approximately 18 hours, if you

do not press Start/Pause touchpad,

the appliance will drain and spin

automatically.

5.11 AUTO Off Mode

5 minutes after the washing program

ends, if you do not deactivate the

appliance, the energy saving function

activates.

The energy saving function decreases

the energy consumption when the

appliance is in the stand by mode.

" is used)

" is on.

" touchpad.

" goes off,

NOTE

All indicators and the display will

switch off.

The indicator of the touchpad

Start/Pause will flash slowly.

Press one of the touchpads to

deactivate the energy saving

status.