Brother P-touch H500 Handbuch zur Schnelleinrichtung - Seite 21
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Etikettenhersteller Brother P-touch H500 herunter. Brother P-touch H500 36 Seiten.
Seite drucken
Battery
1
After making sure that the power is off, remove the
rear cover on the back of the P-touch. If the batteries
are already in the P-touch, remove them.
Make sure that the power is turned off
when replacing batteries.
2
Insert six new AA-size alkaline batteries (LR6), or fully
charged Ni-MH rechargeable batteries (HR6), making
sure that the positive (+) and negative (-) ends of the
batteries match the positive (+) and negative (-) marks
inside the battery compartment.
Users of alkaline batteries
23
Always replace all six batteries at the
same time using brand new ones.
Users of Ni-MH rechargeable batteries
Always replace all six batteries at the
same time with fully charged ones.
Visit us at http://solutions.brother.com/
for the latest information about the
recommended batteries.
3
Attach the rear cover by inserting the three hooks at
the bottom into the slots on the P-touch, then pushing
down firmly until it snaps into place.
If you cannot attach the rear cover, check
to ensure the white lever is in the up
position. If not, lift the lever, and then
attach the cover.
Remove the batteries if you do not intend to use the P-touch for an extended period of
time.
Power Supply
21
Power Supply