Brother QL-1110NWB Handbuch zur Schnelleinrichtung - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Etikettenhersteller Brother QL-1110NWB herunter. Brother QL-1110NWB 9 Seiten.
Auch für Brother QL-1110NWB: Handbuch zur Schnelleinrichtung (9 seiten), Handbuch (2 seiten)
Seite drucken
3. Connect the Power Cord
Connect the AC Power Cord to the printer. Then, plug the AC
Power Cord into an earthed electrical socket.
4. Load the DK Roll
1.
Make sure that the printer is turned Off.
2.
Pull the release levers on both sides of the printer to unlock the DK Roll
Compartment Cover.
Hold the printer by the front, and firmly lift the DK Roll Compartment Cover to
open it.
IMPORTANT
IMPORTANT
Before using the printer, remove the protective sheet (1) from the Label Output Slot.
3.
Place the DK Roll into the Roll Spool Guide (1).
• Make sure that the Roll Spool Arm (2) is inserted firmly in the Roll Spool Guide.
• Make sure the Stabiliser (3) slides into the notch in the printer.
1
3
2
1