Brother MFC 990cw - Color Inkjet - All-in-One Benutzerhandbuch - Seite 35
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fax Machine Brother MFC 990cw - Color Inkjet - All-in-One herunter. Brother MFC 990cw - Color Inkjet - All-in-One 43 Seiten. Quick setup guide - spanish
Auch für Brother MFC 990cw - Color Inkjet - All-in-One: Anweisungen (2 seiten), (Englisch) Kurzanleitung zur Konfiguration (50 seiten)
Seite drucken
Error Message
Cause
There is no incoming call history.
No Caller ID
You did not receive calls or you
have not subscribed to the Caller ID
service from your telephone
company.
The On/Off key on the machine
Power Off
(base unit) is off.
The cordless handset is too far from
Searching for
the machine (base unit).
Base Unit
You have not registered the
(Base Unit
cordless handset.
not detected)
Routine maintenance
Charging the battery
If your battery is getting low, you should
charge the battery. You can see the battery
strength at the bottom right of the LCD.
a
Make sure the AC adapter of the cradle
or the machine (base unit) is connected
to an AC power outlet.
b
Place the cordless handset in the cradle
with the dial pad facing forward.
Troubleshooting and Routine Maintenance
Action
If you want to use the Caller ID feature call your
telephone company. (See Caller ID in the User's
Guide.)
If you want to make a phone call, turn on the
machine (base unit). Then press the
(TALK) key on the codeless
handset to go back to standby mode.
Bring the cordless handset closer to the machine
(base unit).
Register the cordless handset. (See Registering
additional cordless handsets on page 3.)
Cleaning
4
Clean the outside of the cordless handset
with a soft cloth. You should also clean the
4
charger contacts. If the charger contacts are
not clean, the battery may not be charged.
CAUTION
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
cordless handset.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
4
4
24