Fujitsu ScanSnap iScanner fi-6010N Handbuch "Erste Schritte - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Scanner Fujitsu ScanSnap iScanner fi-6010N herunter. Fujitsu ScanSnap iScanner fi-6010N 45 Seiten. Network adf scanner
Auch für Fujitsu ScanSnap iScanner fi-6010N: Spezifikationen (2 seiten), Handbuch "Erste Schritte (21 seiten), Broschüre & Specs (2 seiten), Handbuch "Erste Schritte (21 seiten), Anweisungen zur Reinigung (2 seiten), Anweisungen zur Reinigung (2 seiten)

2.4 Attaching the Keyboard

Cover

The layout of the keyboard may differ according to the

language selected for the operating environment. The

layout of each keyboard cover is prepared according to

language requirements. Take the keyboard cover for the

selected language out of its packaging, and attach it to

the scanner. This scanner is set up for use with an

English (US) keyboard. Therefore, if the scanner is to be

used with an English (US) keyboard attaching a key-

board cover is not required.

Check that the power is turned off

ATTENTION

before attaching the keyboard cover.

1. Clean the surface of the keyboard.

Pay particular attention

to these areas

2. Turn the keyboard cover over and remove the

paper backing from the top strip of double-

sided tape.

Underside

3. Align the top edge of the keyboard cover with

the protruding guides, and firmly smooth the

double-sided tape down.

Align and attach the top-left corner first, then the

center, and last the top-right corner.

Paper backing tape

Top-left guide

Top

attachment

area

4. Flip up the keyboard cover and remove the

paper backing from the bottom strip of double-

sided tape.

Paper

backing tape

5. Gently stretch the keyboard cover forward and

smooth the double-sided tape down.

Bottom

attachment area

Continue setting up the network.

Top-center guide

Top-right guide

Flip up the

keyboard cover