Fujitsu SP-1125 Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung - Seite 13
Blättern Sie online oder laden Sie pdf Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung für Scanner Fujitsu SP-1125 herunter. Fujitsu SP-1125 18 Seiten.
Seite drucken
SP1120\1125\1130 Consumable Replacement and Cleaning
Cleaning the ADF (with Cloth)
The ADF can be cleaned with a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe.
As the scanner continues to feed the documents, paper dust will accumulate inside the ADF and it may
cause scanning errors.
Cleaning should be performed approximately every 3,000 sheets scanned. Note that the cleaning
frequency varies depending on the types of documents you scan. For instance, it may be necessary to
clean the scanner more frequently when you scan documents on which the toner is not sufficiently fused.
The inside of the scanner becomes very hot when the scanner is being used.
Before you start cleaning the inside, make sure to turn off the power, unplug the power
cable and wait at least 15 minutes for the ADF glass to cool down.
ATTENTION
Do not use water or mild detergent to clean the ADF.
It may take a long time to dry if an excessive amount of Cleaner F1 is used. Use it in small quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts
1. Turn off the scanner and wait for at least 15 minutes
2. Open the ADF.
3. Clean the following locations with a cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe.
Glass (x2)
CG00002-291501
Instructions
13