Fujitsu ETERNUS DX60 S2 Benutzerhandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Fujitsu ETERNUS DX60 S2 herunter. Fujitsu ETERNUS DX60 S2 42 Seiten. Server connection. (fibre channel) for aix
Auch für Fujitsu ETERNUS DX60 S2: Benutzerhandbuch (35 seiten), Konfigurationshandbuch (28 seiten), Benutzerhandbuch (14 seiten), Konfigurationshandbuch (16 seiten), Konfigurationshandbuch (38 seiten), Hardware- und Software-Installationshandbuch (36 seiten)

Chapter 6

Setting Up the VMware ESX Server

6.2

For VMware Infrastructure 3

6.2.4

Setting the Software Initiator

Enable Software Initiator in VMware ESX.

Select the [Configuration] tab on VMware Infrastructure Client and click [Storage Adapters].

Select the target iSCSI Software Adapter and click [Properties].

Click [Configure] on the [General] tab.

Select the [Status-Enabled] checkbox and click the [OK] button.

Confirm that the [Enabled] checkbox is selected under "Status" on the [General] tab and click [Config-

ure] again.

Confirm that the iSCSI name is displayed as follows and click the [Cancel] button.

Select the [Dynamic Discovery] tab and click the [Add] button.

Enter the IP address for the iSCSI port of the connected ETERNUS DX Disk storage system as the iSCSI

server IP address, confirm that the port is set to "Port 3260" (default), and click the [OK] button.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

ESX

P3AM-3412-13ENZ0