Fujitsu ETERNUS DX8700 S2 Konfigurationshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Lagerung Fujitsu ETERNUS DX8700 S2 herunter. Fujitsu ETERNUS DX8700 S2 15 Seiten. Disk storage system settings
Auch für Fujitsu ETERNUS DX8700 S2: Benutzerhandbuch (35 seiten), Benutzerhandbuch (42 seiten), Konfigurationshandbuch (28 seiten)
Seite drucken
Chapter 2
Setting Up the ETERNUS DX
2.1
Common Settings
*1: Set the appropriate value from the following table. Do not use [Auto-negotiation].
Table 2.2 Transfer Rate setting values (for FC-AL connection)
Fibre Channel card maxi-
mum speed
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
Table 2.3 FC port parameter settings (Fabric connection)
Parameter
Connection
Transfer Rate
FC Frame Size
Reset Scope
Release Reservation if Chip is Reset
*1: Set the appropriate value from the following table.
Table 2.4 Transfer Rate setting values (for Fabric connection)
Fibre Channel switch maxi-
mum speed
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
*1: Specify "Auto Negotiation" for direct connections to 16Gbit/s Brocade Fibre Channel cards.
When using a Fabric connection, complete the preparatory work and set up the Fibre Channel switch be-
forehand. For setting details, refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connec-
tion- (Fibre Channel) Fibre Channel Switch Settings" or "Fabric OS Administrator's Guide".
Transfer rate setting value
16Gbit/s CA
—
8Gbit/s
4Gbit/s
—
Transfer rate setting value
16Gbit/s CA
16Gbit/s (*1)
8Gbit/s
4Gbit/s
—
9
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
8Gbit/s CA
8Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
Setting value
Fabric
See the table below (*1)
2048
I_T_L
Disable
8Gbit/s CA
8Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
4Gbit/s CA
4Gbit/s
4Gbit/s
4Gbit/s
2Gbit/s
4Gbit/s CA
4Gbit/s
4Gbit/s
4Gbit/s
2Gbit/s
P3AM-5332-15ENZ0