Brother MFC-J4610DW Handbuch zur Schnelleinrichtung - Seite 26

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Software Brother MFC-J4610DW herunter. Brother MFC-J4610DW 45 Seiten. Quick setup guide - spanish
Auch für Brother MFC-J4610DW: Handbuch zur Schnelleinrichtung (47 seiten), Handbuch (36 seiten), Handbuch (22 seiten), Handbuch zur Produktsicherheit (17 seiten), Handbuch (13 seiten), Handbuch (13 seiten), Handbuch zur Produktsicherheit (20 seiten), Schnellstart-Handbuch (29 seiten), Handbuch zur Produktsicherheit (25 seiten), Start Here Handbuch (47 seiten), (Spanisch) Guia De Web Connect Handbuch (38 seiten), (Spanisch) Handbuch (24 seiten), (Englisch) Handbuch zur Produktsicherheit (16 seiten), (Spanisch) Handbuch (12 seiten), (Spanisch) Handbuch (11 seiten), (Englisch) Kurzanleitung zur Konfiguration (47 seiten)

For Wireless Network Users

For wireless network interface users

First you must configure the wireless network settings of your machine to communicate with your access

point/router. After the machine is configured to communicate with your access point/router, computers on your

network will have access to the machine. To use the machine from these computers, you will need to install the

drivers and software. The following steps will guide you through the configuration and installation process.

To achieve optimum results with normal everyday document printing, place the Brother machine as close to the

network access point/router as possible with minimal obstructions. Large objects and walls between the two

devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Due to these factors, wireless may not be the best method of connection for all types of documents and

applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you

may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest throughput speed.

Although your Brother machine can be used in both a wired and wireless network, only one of the connection

methods can be used at a time.

NOTE

If you have previously configured the wireless settings of the machine you must reset the network settings

before you can configure the wireless settings again.

On your machine, press Settings.

Press s or t to display Network. Press Network.

Press s or t to display Network Reset. Press Network Reset.

Press Yes to accept. Hold down Yes for 2 seconds to confirm.

The following instructions are for infrastructure mode (connected to a computer through an access point/router).

Infrastructure Mode

a Access point/router

b Wireless network machine (your machine) connected to the access point/router

c Wireless-capable computer connected to the access point/router

d Wired computer connected to the access point/router

e Mobile device connected to the access point/router

Please make sure the wireless network settings of the machine match the access point/router.

NOTE

To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access

point/router) you can find instructions in the Network User's Guide on the CD-ROM.

You can view the Network User's Guide by following the instructions below.

1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click User's Guides, and then click PDF documents.

4 Click Network User's Guide.

For Macintosh:

2 Double-click User's Guides. Choose your model and the language.

3 Click User's Guides, and then click Network User's Guide.