Indesit DSRL 17B19 Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Indesit DSRL 17B19 herunter. Indesit DSRL 17B19 16 Seiten.

Seite drucken

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack (if any).

Water softener settings

Before starting the first wash cycle, set the hardness lev-

el of

the water from the mains supply. (see chapter Rinse

aid and refined salt).

First load the softener tank with water, then introduce about

1 kg of salt. It is perfectly normal for water to flow out.

As soon as this procedure is complete, run a wash cycle.

Only use salt that has been specifically designed for dish-

washers.

After the salt has been poured into the machine, the LOW

SALT indicator light switches off.

If the salt container is not filled, the water softener and the

heating element may be damaged as a result.

Technical data

width 45 cm

Dimensions

height 85 cm

depth 60 cm

Capacity

10 standard place-settings

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

Water supply pressure

7,25 – 145 psi

Power supply voltage

See appliance data plate

Total absorbed power

See appliance data plate

Fuse

See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

The machine has a buzzer/set of tones

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc. *

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

(depending on the dishwasher model)

light

Only available in selected models.

(depending on the