AC-Guard AC Cage Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Zubehör für Klimageräte AC-Guard AC Cage herunter. AC-Guard AC Cage 2 Seiten.

Recommended tools: Tape measure, drill with 1/4" masonry bit, four tap cons,

four washers, and a marker.

Before beginning: 1. Measure and write the a/c unit's height, width and depth.

Width

Depth

Height

4. Insert ALL set screws loosely as these will need to be tightened once cage's

ﬁnal dimension has been reached

5. Add 4 inches to the height dimension of your a/c unit

NOTE: Adjusting the Front Center section fully will simplify assembly

6. Remove yellow tape from front center section

7. Measure Front Center section top to bottom and extend the cage to the height

required (#6) See diagram 2.C

2. Remove all shrubs or debris from around ac unit.

3. Place all box contents ﬂat on the ground, arranging sections

in Left, Front Center, and Right format, with stubs facing up

Assembly instructions:

1.Set Left, Front Center and Right sections ﬂat on the ground

with stubs and stickers facing up. See diagram 2

2.Align L-shaped bar's orange R sticker with R section R

sticker and slide fully on See diagram 2.A

3.Align L-shaped bar's yellow L sticker with Left section L

sticker and slide fully on See diagram 2.B