AQUA FILTER EXCITO Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Water Filtration Systems AQUA FILTER EXCITO herunter. AQUA FILTER EXCITO 14 Seiten.

6.2. Instructions for connecting and disconnecting filter cartridge and elbow connector (new filter cartridge with elbow connector)

Disconnecting elbow connector from filter cartridge:

1) Remove safety clips from quick connector (fig.1).

2) Push quick connector's flange symmetrically and pull the tubing out (fig. 2).

3) Unscrew inlet and outlet connectors from old filter cartridge (fig.3)

4) Remove old Teflon tape (fig.4).

5) Apply mutliply layers of new Telfon tape (ensure that Telflon tape is winded in the opposite direction to the direction connector will

be installed) (fig. 5).

Connecting elbow connector with filter cartridge:

1) Screw the elbow connector back to new filter cartridge.

NOTE! Do NOT remove elbow connector after the installation has been started. Stopping and removing (unscrewing) the

element may result in inadequate connection and water leak. (fig.6).

Fig. 1

7. System Installation - Stage I

IMPORTANT NOTE! Manufacturer is not responsible for any damages that result from improper installation or use of system.

System installation should be performed only in temperatures above 2°C (35.6°F).

IMPORTANT NOTE: Before installing the system, remove from the filter housing all components necessary for installation.

Shut off cold water supply valve.

Screw chrome-plated adapter onto the shut-off valve to

allow easy installation of SEWBV1414 valve and its easy

opening and closing.

IMPORTANT NOTE! Remember to place rubber gaskets

in between the connections.

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Unscrew flexible tubing from the shut-off valve (the adapter).

IMPORTANT NOTE! Between the shut-off valve and

flexible tubing is a rubber gasket - be sure not to lose it.

Wind a few layers of Teflon Tape (TAS0003) on shut-off

valve adapter (SEWBV1414).

Fig. 6