AVProConnect AC-EX100-UHD-R Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender AVProConnect AC-EX100-UHD-R herunter. AVProConnect AC-EX100-UHD-R 20 Seiten. 100m hdmi 2.0 extender with hdcp 2.2 ethernet, audio extraction, edid management
AC-EX100-UHD
IR Configuration
■
IR can be used in 2 ways:
1. From Rack (Control System Direct): Plug a MONO 3.5mm cable
into an emitter port of any control system directly into the "I-
PASS" (IR RX) Port on the AC-EX100-UHD Transmitter to send pass IR
Signals directly to the remote end.
2. From Remote End: Use and IR Sensor on the AC-EX70-UHD
Receiver (IR In Port) and send IR Signals BACK to the rack and come
out of the TRANSMITTER IR Out Port with an emitter.
*There is a 3-20v protection circuit built into the AC-EX100-UHD-T
Transmitter to safely plug IR signals directly into it for pass through to
the remote end.
11