Aqua Science Fleck 2510 SXT Digital Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Water Filtration Systems Aqua Science Fleck 2510 SXT Digital herunter. Aqua Science Fleck 2510 SXT Digital 12 Seiten. Digital water softener system

Seite drucken

Fleck 5600 SXT Digital Water Softener System Installation Manual

Water Softener Tank Assembly and Valve Installation (continued)

Water Out

Bypass Valve - Top View

Next install the Bypass Valve into your existing water lines.

Make sure that your "Water In" always goes into the right-

side of the Bypass as if you were looking at the Bypass

from a top view.

2.) Insert the Control Valve into place with the Bypass

and then fasten with the clips. Make sure not to pinch

the O-ring that are on the valve ports. Turn handle so it's

pointing toward bypass.

800-767-8731

Water In

(Connected to your water supply)

1.) Unscrew the clips from the back of the Control Valve

before you move the Control Valve into place with the

Stainless Steel Bypass that you just installed into your

water lines.

3.) Ensure that the measurements match the height of the

valve ports in the back of the Control Valve.

Then plumb to valve.

(Connected to your water supply)