AVS Uriel Systems HD1600F-PDR Kurzanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Kurzanleitung für DVR AVS Uriel Systems HD1600F-PDR herunter. AVS Uriel Systems HD1600F-PDR 6 Seiten.

Connecting different components

Connecting to a monitor

Please check the monitor resolution before connecting to a monitor.

 Using HDMI&VGA Port : 1920 x 1080p

Use of HDMI certified cable is recommended when connecting to a HDMI Monitor.

Please connect 1080p, 720p, 960H or NTSC/PAL camera using the recommended cable

PoC Camera

If PoC cameras and PoC adaptor are connected to a DVR, DVR supplies necessary power to cameras through

coaxial cable, and DVR can control cameras through coaxial cable without RS-485 cable installation.

Recommended Cables

Cable Category

5C2V

4C-FB(T), 4C-HFB(T), RG59

5C-FB(T), 5C-HFB, L-6CHD, RG6

5C-HFBT

 Transmission distance will be affected by cable types and installation site environment

 Transmission distance of cables shows differences based on the attenuation factor at 750MHz.

(dB/100m < 25dB is recommended)

 Foamed or high-foamed trishield cable is recommended.

 Coaxial cable and BNC connector must have 75Ω impedance.

 Careful to cable deformation due to high pressure over the cable.

 Don't pull the cable with too much force.

 During the arrangement of the coaxial cables at the rear of the rack, if tied too tightly, inside/outside

insulator of cable could be deformed, so tie it loosely within cable's curvature range.

HD-SDI transmit

distance(*)

about 90M

about 140M

about 180M

about 200M

Applications

Analog cable

High-foamed cable (Double or Trishield

recommended)

Cable for HD-SDI

* Depends on manufacturer and models.