Avsl 953.118UK Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Avsl 953.118UK herunter. Avsl 953.118UK 9 Seiten. Compact 100v mixer-amplifiers

Seite drucken

Troubleshooting

No power LED on

control panel

LED display is lit but no

output

USB player will not play

audio from media

No connection via

Bluetooth

Output is very loud or

distorted

Output is working but at

very low level

Feedback from

microphone

Amplifier overheating

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic

equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines

Hereby, AVSL Group Ltd. declares that the radio equipment type 953.108UK, 953.109UK and 953.118UK are in compliance with

The full text of the EU declaration of conformity for 953.108UK is available at the following internet address:

The full text of the EU declaration of conformity for 953.109UK is available at the following internet address:

The full text of the EU declaration of conformity for 953.118UK is available at the following internet address:

Ensure IEC lead is in good condition and connected properly

Check mains inlet fuse

Ensure POWER switch is on

Check input signals and condition of input connection leads

Check level controls are turned up

Check file type on USB or connection via Bluetooth is OK

Check MASTER, MIC, LINE IN or MEDIA controls are turned up

Check speaker output terminals are connected correctly

Check speakers are working (test on another amp if available)

Press PLAY on transport controls

Check memory device is connected properly (remove and re-insert)

Check file types – standard mp3 files are required

Check memory device works on a PC or Mac for standard playback

Check that the sending device is connected to the correct "MP3A" ID

Check the volume output level of the sending device

Check level of input signal is not too high

Turn down Level, Bass, Treble controls or reduce level of input signal

Ensure Hi-Z line level input(s) not connected via MIC input

Check input audio source level is not too low

Turn up Level, Bass and Treble controls

Check for quiet recording of media files on USB

Face microphone away from speakers and monitors

Turn down MIC volume control

Ensure cooling vents are clear from debris and dust

Check that 4Ω or 8Ω speakers are not connected to 100V terminals

Ensure total 100V speaker wattage is lower than the amplifier rating

Ensure that 100V and 4Ω or 8Ω speakers are not both connected

Ensure that total load connected to 4-16Ω output is not less than 4Ω

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

http://www.avsl.com/assets/exportdoc/9/5/953108UK%20CE.pdf

http://www.avsl.com/assets/exportdoc/9/5/953109UK%20CE.pdf

http://www.avsl.com/assets/exportdoc/9/5/953118UK%20CE.pdf

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

Directive 2014/53/EU

DM series mixer-amplifiers User Manual