Dell 210-ALUI Benutzerhandbuch - Seite 43

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Dell 210-ALUI herunter. Dell 210-ALUI 48 Seiten.

Troubleshooting

WARNING: Before you begin any of the procedures in this section, follow the

Safety

Instructions.

Your monitor provides a self-test feature that allows you to check if your monitor is

functioning properly. If your monitor and computer are properly connected but the

monitor screen remains dark, run the monitor self-test by performing the following

steps:

1. Turn off both your computer and the monitor.

2. Disconnect all video cables from the monitor. This way, the computer doesn't

have to be involved.

3. Turn on the monitor.

If the monitor is working correctly, it detects that there is no signal and one of the

following message appears. While in self-test mode, the power LED remains white.

Dell S2718HN/NX

The display will go into Power Save Mode in 5 minutes.

Dell S2718HN/NX

The display will go into Power Save Mode in 5 minutes.

NOTE: This box also appears during normal system operation, if the video cable

is disconnected or damaged.

4. Turn Off your monitor and reconnect the video cable; then turn on your

computer and the monitor.

If your monitor remains dark after you reconnect the cables, check your video

controller and computer.

No HDMI Cable

www. dell.com/support/monitors

No VGA Cable

www.d ell.com/support/monitors

Troubleshooting