Dell E198FP Benutzerhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Dell E198FP herunter. Dell E198FP 36 Seiten. Dell e198fp: quick start
Auch für Dell E198FP: Setup-Handbuch (2 seiten)

Seite drucken
Dell E198FP Benutzerhandbuch
Back to Contents Page
 

Setting Up Your Monitor

Dell™ E198FP Flat Panel Monitor 
  Connecting Your Monitor
  Using the Front Panel Buttons
  Using the OSD
  Using the Dell Soundbar (Optional)
 

Connecting Your Monitor

CAUTION:
Before you begin any of the procedures in this section, follow the
1. Turn off your computer and unplug its power cable.
2. Connect the blue (analog D-sub) display connector cable to the corresponding video port on the back of your computer. (The graphic is for illustration 
only. System appearance may vary).
3. Connect the power cable for your display to the power port on the back of the display.
4. Plug the power cables of your computer and your display into a nearby outlet. Your monitor is equipped with an automatic power supply for a voltage
range from 100 to 240 Volt at a frequency of 50/60 Hz. Be sure that your local power is within the supported range. If you are unsure, ask your
electricity supplier.
5. Turn on your display and computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.
Using the Front Panel Buttons 
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,
an OSD shows their numeric values as they change.
Downloaded from ManualMonitor.com Manuals
Safety
Instructions.