Dell PowerEdge 350 Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Dell PowerEdge 350 herunter. Dell PowerEdge 350 32 Seiten. Wake-on-lan (wol) support on dell servers
Auch für Dell PowerEdge 350: Aktualisierung der Systemdiagnoseinformationen (2 seiten), Information Update (30 seiten), Hardware-Installation (22 seiten), Handbuch (15 seiten)

support.dell.com

Dell™ PowerApp™ 100 and 110

Appliances and PowerEdge™ 350

Systems — Rack Installation

Guide

This installation guide provides instructions for trained service technicians installing

one or more Dell PowerApp 100 or 110 or PowerEdge 350 systems in a rack. This

guide includes procedures for the following three rack kits:

•

Two-post center-mount

•

Two-post flush-mount

•

Four-post rack cabinet

One rack kit is required for each system to be installed in the rack.

Two-Post Center-Mount Rack Kit

Installation

This procedure provides instructions for installing a Dell system in a two-post open-

frame relay rack, such as those found in telecommunications equipment facilities.

Both 3-inch and 6-inch wide two-post racks are accommodated.

The two-post open-frame relay rack must be properly secured to the floor, to the

ceiling or upper wall, and where applicable, to adjacent racks, using floor and wall

fasteners and bracing specified or approved by the rack manufacturer or by industry

standards. See the two-post open-frame relay rack manufacturer's installation docu-

mentation for precautionary warnings and information before attempting this

installation.

CAUTION: Do not attempt to install the system into a two-post open-frame

relay rack that has not been securely anchored in place. Damage to the

system and personal injury may result.

See "Safety Instructions" at the front of this document for additional safety informa-

tion regarding rack installation.

Rack Installation Guide

1-1